PTR VENT 1 7.62x51mm Suppressor FDE
The VENT 1 is PTR’s full-size .30 caliber rifle suppressor, 3D-printed from titanium as a single-piece body, in FDE. PTR lists it at 8.74″ long and 12.3 oz without the mount, and 1.75″ in diameter.
Calibers and hosts
PTR rates it for 7.62x51mm NATO, .308 Winchester and .300 Blackout. On 7.62, PTR advises a 14″ barrel and says 12.5″ is acceptable but may shorten the suppressor’s life. PTR does not list a minimum barrel for .300 Blackout. PTR rates it for limited full-auto use within its firing schedule; the official manual allows 90 to 120 rounds fired in bursts, then a 10-minute cool down to ambient temperature. Looking for a gun to run it on? See our Suppressor Ready guns.
Build
The body is 3D-printed titanium and uses PTR’s Purposely Induced Porosity (PIP) design. It is made in the USA.
Mounting
The rear is a 1.375×24 HUB, and PTR includes a 5/8×24 direct-thread adapter.
Specs
| Manufacturer | PTR |
|---|---|
| Model | VENT 1 |
| Model Number | V1-3080102 |
| UPC | 810161700288 |
| Type | Suppressor |
| Caliber | 7.62x51mm NATO / .308 Winchester / .300 Blackout |
| Mount | 1.375×24 HUB; 5/8×24 direct-thread adapter included |
| Materials | 3D-printed titanium, monolithic body |
| Full Auto Rated | Limited, per PTR |
| Minimum Barrel | 14″ advised on 7.62x51mm (12.5″ acceptable, may reduce lifespan); none listed for .300 Blackout |
| Finish | FDE |
| Length | 8.74″ |
| Diameter | 1.75″ |
| Weight | 12.3 oz without the mount |
| Country of Origin | USA |
Buying and shipping
Toro Tactical is a Class 3 NFA dealer in Humble, TX. See all our Suppressors.
Buy it in our Humble, TX store or online. Questions? Call us at 346-861-3404.







